What Are The Raw Materials For 3d Printing

Jul 09, 2022

Leave a message

It is understood that there are more than 200 types of 3D printing materials currently available, but it is far from enough to correspond to the complicated products in reality. If these 3D printing materials are classified, they can be divided into petrochemical products, biological products, metal products, lime concrete products, and other categories. Currently, the commonly used 3D printing materials in the industry are as follows:


1. ABS plastic

ABS is the most commonly used 3D printing material for FDM. Currently, there are a variety of colors to choose from. It is the favorite printing material for consumer 3D printer users, such as printing toys and creative home accessories. ABS materials are usually filament coils, which are heated and melted through a 3D printing nozzle. Since the nozzle needs to solidify immediately after spraying, the heating temperature of the nozzle is controlled to be 1°C to 2°C higher than the thermal melting point of the ABS material. Different ABSs cannot be matched for nozzles that cannot adjust the temperature due to different melting points. This is why Reasons why it is best to buy printing materials from the original manufacturer.


2. PLA plastics

PLA plastic fuse is another commonly used 3D printing material, especially for consumer 3D printers, PLA can be degraded and is an environmentally friendly material. PLA generally does not require a heated bed, unlike ABS, so PLA is easier to use and more suitable for low-end 3D printers. PLA plastic is also available in multiple colors, as well as translucent red, blue, green, and fully transparent materials. For the same reason as ABS, the versatility of PLA also needs to be improved.


3. Acrylic

Acrylic, also known as PMMA or plexiglass, is derived from English acrylic (acrylic plastic), and its chemical name is polymethyl methacrylate. Acrylic materials have a good surface finish and can print transparent and translucent products. At present, acrylic materials can be used to print tooth models for orthodontic treatment.


4. Nylon aluminum powder material

This material is mixed with aluminum powder in nylon powder. It is printed with SLS technology, and the finished product has a metallic luster. It is often used in the printing of creative products of decorations and jewelry.


5. Ceramics

Ceramic powder is sintered with SLS, and glazed ceramic products can be used to hold food. Many people use ceramics to print personalized cups. Of course, 3D printing cannot complete the high-temperature firing of ceramics. This procedure now needs to be done after printing. high-temperature firing


6. Resin

Resin is an important raw material for SLA (Stereolithography) photocuring molding. At present, photosensitive resin is the most widely used. It has many variations, including transparent and semi-solid. It can be used to make intermediate design process models. Because its molding accuracy is higher than that of FDM. High, it can be used as a biological model or a medical model.


7. Glass

Real glass is currently being tested, the glass powder is printed using SLS technology, and the glass material is as varied as resin and polypropylene.


8. Stainless steel

Stainless steel is hard and has a strong firmness. The stainless steel powder is 3D sintered using SLS technology and is available in silver, bronze and white colors. Stainless steel can make models, modern art, and many functional and decorative items.


9. Other metals - silver, gold and titanium

These metal materials are all powder sintered by SLS, gold and silver can be used to print accessories, and titanium metal is often used in high-end 3D printers to print components on aircraft.


10. Color printing and other materials

There are two cases of color printing, one is two or more colors of the same or different materials are extruded from their respective nozzles, the most commonly used is a consumer-grade FDM dual-nozzle printer, through two or more materials combinations to form limited color combinations. The other is to use the principle of inkjet printers. Through the combination of different dyes, they are mixed with adhesives and injected into the printing material powder for solidification. In theory, this technology can print "true color" 3D objects. The printing material is usually selected as resin, polypropylene or ABS.


Send Inquiry