Automatic Desktop Plastic Injection Moulding Machine
◆ Maximun injection volume：10g
◆Temperature control range：50°C350°CAccuracy+1°C
◆Mold size：150*150mm(max)
◆injection spend：(5g PP material)one cycle every 12 seconds (excluding cooling)
◆Control system：Integrated control system/5 inch touch screen
◆Power：220/1kw
Description
Technical Parameters
Automatic Desktop Plastic Injection Moulding Machine is designed for small production scenarios and innovative research and development. It integrates automation technology and can automatically complete the entire process of plastic injection molding, from plasticizing, injection, and pressure holding of plastic particles to product cooling and demolding, greatly improving production efficiency. The equipment has a compact structure and does not take up too much space, so it can be easily placed in a laboratory, small factory or studio.
| Project | Details |
| product | Desktop injection machine |
| Place of Origin | Mainland China |
| sort by color | M2 Deposit, M2 Final, M2 Machine |
| Plastic Machinery Type | All-electric injection molding machine |
High degree of automation: Without frequent manual intervention, the entire injection molding process from plastic feeding, plasticization, injection, pressure holding to demolding can be automatically completed, reducing labor costs, improving production efficiency and product consistency.
Precise control: Equipped with advanced temperature control and pressure control systems, it can accurately adjust the temperature and pressure parameters during the injection molding process to ensure the precise size and stable quality of plastic products, effectively reducing the defective rate.
Compact and small: It adopts a desktop design with a small size and small footprint, which is easy to place in various small spaces to meet the use needs of laboratories, small studios and other venues.
Convenient operation: With an intuitive operating interface and an easy-to-understand control system, operators can become proficient after simple training, and easily set parameters, start and monitor equipment operation.
work principle
Plastic plasticization
Plastic particles enter the heating barrel through the hopper, and the heating element outside the barrel heats them. At the same time, the screw rotates to push the plastic particles forward and stir them, so that they gradually melt and plasticize to form a plastic melt with good fluidity.
High-pressure injection
The plasticized plastic melt is injected into the mold cavity through the nozzle at high pressure under the strong thrust of the screw, so that the melt quickly fills the cavity to ensure the complete molding of the product.
Pressure holding and shaping
After the melt fills the cavity, a certain pressure is continuously applied to supplement the volume reduced by the cooling and shrinkage of the plastic, to ensure the shape integrity and dimensional accuracy of the plastic product, and to prevent defects such as shrinkage holes and depressions.
Cooling and demolding
Circulating cooling water is introduced into the cooling water channel in the mold to cool the plastic melt in the cavity so that it can be quickly solidified and formed. After molding, the ejector ejects the product from the mold under mechanical or hydraulic action to complete the injection molding process.
FAQ
1.What size of plastic products is this injection molding machine suitable for?
This equipment is suitable for producing small plastic products, and the specific size depends on the specifications of the mold used.
2.Is the maintenance cost of the equipment high?
The maintenance cost is relatively low. Daily maintenance mainly involves cleaning the equipment, checking the wear of wearing parts (such as screws, nozzles, seals, etc.) and replacing them in time, regularly lubricating and maintaining key components, and operating and maintaining as required, which can effectively extend the service life of the equipment.
3.What plastic raw materials can be used?
Common thermoplastics such as ABS, PP, PE, PS, etc. are all applicable. Some models are also compatible with some special plastics, such as PC, PA, etc., but before use, it is necessary to confirm the compatibility of the equipment with specific materials to avoid damaging the equipment or affecting the quality of the product.
4.Can the injection speed of the equipment be adjusted?
Yes. The injection speed can be flexibly adjusted according to the shape, size and characteristics of the plastic raw materials of the product. By setting appropriate parameters through the operation interface, the injection speed can be accurately controlled to meet different production needs.
If you have any questions, you can leave us a message
Contact Us:xslightings@xslighting.com
Hot Tags: automatic desktop plastic injection moulding machine, China, suppliers, manufacturers, factory, custom, wholesale
Tech Specs
| Dimensions | 600*300*535mm |
| Equipment weight | 45kg |
| Screw diameter | 16mm |
| Injectionmethod | screw extrusion |
| Glue injection motor torque | 12N:m |
| Clamping motor torque | 8N:m |
| Maximun injection volume | 10g |
| Maximun clamping force | 1T |
| Temperature control range | 50°℃350℃Accuracy±1℃ |
| Heating interface | comes with 4heatling control ports.3sections of barrel+1section of mold |
| Mold opening and closing stroke | 135mm(excluding mold) |
| Mold size | 150*150mm(max) |
| injection spend | (5g PP material)one cycle every 12 seconds (excluding cooling) |
| Control system | Integrated control system/5 inch touch screen |
| Power | 220/1kw |
Send Inquiry
