Entry Level 5 Axis CNC Machine
bed dimension:φ100mm
Maximum payloadof the work table:5kg
speed 0-24000rpm
Windows System Control
Support G code control
CAD or CAM milling
Description
Technical Parameters
The unit features a compact layout that occupies limited floor space. Operators complete workflow in sequence: import machining programs via the built-in control system, clamp raw workpieces on the worktable, start the spindle and axes movement to execute formal cutting. No dedicated foundation construction is required for on-site installation; the unit can be fixed on ordinary workshop ground after level adjustment.
This device addresses the limitation of 3-axis CNC machines that cannot complete complex angled feature machining in one setup. It operates under conventional indoor workshop conditions with normal room temperature and standard grid power supply. Common failure modes include guide rail abrasion from long reciprocating movement and positioning deviation of rotary axes after frequent angle switching. It can be independently deployed in training workshops for skill practice, or applied in small-batch prototype production lines to finish custom mechanical parts.
Simplified Operation and Easy Learning Threshold
The CNC controller uses simplified operation logic with graphical parameter adjustment for spindle speed, feed rate, and axis movement. Preloaded machining templates support plane milling, inclined surface cutting, and rotary engraving, reducing manual parameter setup during training and trial machining.
Space-saving Layout and Flexible Placement
The compact enclosure structure integrates the electrical cabinet and coolant module within a reduced floor area. The machine can be installed in training workshops, prototype machining rooms, and small production cells with limited installation space.
Detailed Highlights
True 5-Axis Linkage Machining
Supports full 5-axis linkage and RTCP to finish complex curved workpieces with one-time clamping processing.
Multi-Material Precision Cutting
Adapts aluminum, plastic and resin materials with stable dimensional accuracy and fine machining surface effect.
Compact Integrated Structural Design
High-rigidity integral body reduces cutting vibration, compact size fits workshop and laboratory placement.
Energy-Saving Stable Continuous Operation
Low power consumption design enables long-time stable running, suitable for teaching and small batch production.
Test video
Why Choose Xinshan's Desktop 5-Axis CNC
Custom configuration for teaching scenarios
This desktop 5-axis CNC is configured for laboratory teaching and hands-on operation, with structure adjusted for training instead of full-load industrial cutting.
Space & power adaption
It adopts miniaturized frame structure, occupies standard lab floor area, and connects to conventional mains power, eliminating dedicated power distribution and special foundation layout.
Matched teaching resources
The package contains operation manuals, machining cases and course documents; online technical guidance is provided to assist staff in conducting practical training.
Product & service configuration
The manufacturer supplies desktop CNC equipment for prototyping, small-batch machining and teaching use. Spare parts and remote after-sales support are available to sustain continuous equipment operation.
FAQ
It is mainly suitable for aluminum alloy, engineering plastic, resin, wax and copper soft materials. It meets daily prototype making, craft carving and small precision part processing needs perfectly.
Hot Tags: entry level 5 axis cnc machine, China, suppliers, manufacturers, factory, custom, wholesale
Tech Specs
| Packing Size | W800xD600xH800mm | Packing weight | 100-120kg |
| Equipment size | W600xD400x H510mm | weight of equipment | Net weight of 45kg,with sheet metal of 75kg |
| Bed Dimension | φ100mm | Maximum payload of the work table |
5kg |
| XYZ effective travel | X160xY200xZ130mm | AC effective travel | A:-30-120°,C 360° |
| Three axis processing range | X160xY200xZ125mm | Five axisprocessing range | Cylinder:φ 150 H105mm,φ 100 H120mm,cube W125D 125 H110mm |
| Three-axis processing accuracy | Linear axis parallelism & vertical degree of 0.03mm, Travel range is 0.02mm |
Five axis processing accuracy | Linear axis parallelism &vertical degree of 0.05mm, Fve-axis spatial accuracy of<0.05mm |
| XYZ Ball wire rod | X&Z:1204C7,Y:1604 C7,up gradable C5 | AC axis |
1:80 20 Harmonic reducer return<1' |
| The XYZ linear guide rail | X&Z Hiwin MGN12 Y:Hiwin MGN15 | body frame | 6061T6 aviation aluminum+stressed component adjustment of 45 steel |
| Processing speed | 4000mm/min vary by material | ||
| principal axis | φ65mm 800W Water-cooled electric spindle at 24,000r /min |
protect | Organ is dust-proof +oil seal is waterproof and dustproof |
| Tool diameter& length | ER11.0-8mm,≤75mm | Part fixtures | Steel fixture with reserved hole position Can add er50 clip holder,63,80 card |
| work material | Metal:aluminum alloy.copper alloy,gold alloy,silveralloy.*steel,*titanium alloy | Non-metat plastic,wood,wax,jade,glass etc |
Shipping List
| Order Number | Type | Name | Explain | Quantity |
| 7 | Equipment | Main Engine | Naked machine does not contain sheet metal |
1 |
| 2 | Material Fixtures | Type A: self-centering platform pliers |
8-55mm square ping | 1 |
| 3 | Knife Fixture | ERlI clamp cylinder | ER11-4&ER11-6 | 1 |
| 4 | Cutter | Sharp knife,vertical miling cutter,ball knife |
0.2mm sharp knife (for carving)10 2,4,6mm vertical milling cutter 2, R ball knife 2 |
18 |
| 5 | Electrical | power box | Motor control frequengy converter | 1 |
| 6 | power line | Total power supply for equipment | 1 | |
| 7 | USB data wire | Connect the computer to the host machine | 1 | |
| 8 | Electronichand wheel | Operation shaft movement | 1 | |
| 9 | Tool | 1 set of inner agon wrench | 1.5-109PCS | 1 |
| 10 | A set of spindle wrench | 14 &17mm open-wrench | 1 | |
| 1 | Material | Generation wood 4 pieces | Practice with | 1 |
Options and upgrades
| Order Number | Type | Name | Explain | Quantity |
| 1 | Transmission | Domestic grinding of C5 silk rod | 1204 &1604 | 3 |
| 2 | Prindpal axis | 40000r pm | Also power 800W 65mm diameter | 1 |
| 3 | Knife Fixture | Spindle ER11 clip cartridge | 2~8mm full set | 10 |
| 4 | Square Material Fixture | A self-centering clamp reverse clamp | 50-75mm clamp range | 1 |
| 5 | B increase self-centering pliers | 0-100 mm clamp range | 1 | |
| 6 | Stick fixture | Hand tight 80 clamp (four paws) |
Occupying height 48mm travel,can hold the rod material &square material |
1 |
| 7 | Metalworking 80 chuck (three caws) |
The height of 66mm travel,the centricity is better than the four daws |
1 | |
| 8 | ER40 splint | High grip concentricity,used with ER40 | 1 | |
| (ER50,ER40 two optional one) | Cartridge (Clamp-holding Φ 4to 30 mm) | |||
| 9 | One set of ER40 clips | 6.8.10.12.15.18.20.25.28.30mm Clamp cylinder (corresponding to same diameter) |
10 | |
| 10 | ER50 splint | Use with ER50 cartridge (damp Φ 4-36mm) | 1 | |
| 11 | ER50 cartridge optional model | Within 4-36 mm of optional size,70 yuan each | 1 |
Send Inquiry
