Shaoxing Xinshan Science Technology Co.,Ltd
You Are Here:Home > News > Content
Products Categories
Contact Us

Shaoxing Xinshan Science Technology Co.,Ltd

Address: Dongfangyimai, No. 2, Pujiang Road, Shaoxing, China

Tel: 86-575-85121398

M/P: 86-13305858081

Fax: 86-575-85133128



Solar LED Lights
Jun 20, 2017

Solar LED lights

Professional solar LED lights is to use the sun as an energy source for lighting at night, is a new type of lighting, the invention is a kind of very accord with environmental protection concept. There are only a few components of a solar-powered LED lamp, and its installation looks simple, but there are some details that can't be ignored. What are the considerations when installing specialized solar LED lights?

The installation procedure of a solar LED lamp is known

1. Determine the foundation

When installing solar LED lights to make sure good foundation, so the operator must first survey geological situation, had better choose no shading material and the position of the underground without other facilities, for eligible to locate the position of casting, ensure good embedded parts and foundation and the ground at the same horizontal plane, such ability ensures light pole erected after tilt will not happen.

2. Components installed

Solar LED lights for the quality of the assembled by a variety of components, so when installing component method is very important, there are a variety of installation methods, but different installation methods have different external load requirements. So no matter which method is installed, the installed solar LED lamp must be able to perform all aspects of the performance. You must also ensure that the component is not affected by the impact of the collision and so on.

3. Secondary embedded

In solar LED headlamp unit after installation, should check the whole street lamp molding effect, if there are street light pole tilt think it to adjust, ultimately to ensure that all solar LED lights are in line with the overall installation effect. For the Angle deviation of the front of the panel, adjust the direction of the front of the panel, and use the compass tool to move the direction. You should also check the lamp arm, the lamp head, etc. By the time you check out all the things you should be aware of, you can use cement to make a small square of the base, making the solar leds more resilient.

Above is to install solar LED lights step method, want to know has no effect when choosing position must choose the place where the sun, lest affect absorb solar energy battery components, and the best location for the battery components direction is toward the south. After using a period of time, the battery component of the solar LED lamp will be cleaned, allowing it to receive the maximum amount of solar energy and extend the service life.