Shaoxing Xinshan Science Technology Co.,Ltd
Address: Dongfangyimai, No. 2, Pujiang Road, Shaoxing, China
LED products due to the type and form is more, certification is also more complicated than traditional lighting products. According to professional and authoritative third-party testing and certification services, here in Asia LED lamps and lanterns and light source certification as a simple comb.
CB (Certification Body), is the international electrotechnical commission (IECEE) to establish a set of global mutual recognition system, there are 34 countries around the world 45 Certification bodies to participate in a system of mutual recognition.
A member of the CB system contains all the importance of mechanical and electrical products export of China: the United States, Japan, Western Europe, northern Europe, Poland, Russia, asean, South Africa, Australia and New Zealand, etc.
Why do you want to do CB?
First of all, according to the test report any license issuing agency issued, all the other member states can be obtained under the architecture of national certification. Through the mutual recognition of test reports give international trade become more easy.
Second, the multinational certification application at the same time, using CB report card can shorten the certification process, reduce test cost.
CB: is there any requirement?
For the LED lamps and lanterns, as long as meet IEC60598-2 - x + IEC 60598-1, IEC 62471 safety rules.
For the LED light source, as long as meet IEC62560 + IEC 62471 safety regulations.
It is important to note that the LED tubes, for the moment, cannot apply for CB.
Major Asian countries or regions
China compulsory certification
In December 2001, the general administration of quality supervision, inspection and quarantine issued the regulations on compulsory product certification, with mandatory product certification system to replace the original imported goods safety quality license system and the system of electrical product safety certification.
China compulsory product certification CCC certification or 3 c certification for short. Is a kind of the statutory compulsory safety certification system, is widely used in the world to protect consumers' rights and interests, the safeguarding of consumers' personal property safety basic practices.
Basic authentication mode: type testing + factory inspection (+ supervision for the first time)
Authentication mode: large lamps and lanterns design appraisal + part of the project type testing, factory inspection (+ supervision for the first time)
* large lamps and lanterns:
(1) > 100 kg weight
(2) width > 1.8 m and height > 1.0 m
(3) > 1.8 m in diameter and height > 2.0 m
(4) > 1.0 m in diameter and height > 4.0 m
On September 1, 2014, lighting CCC certification to implement new rules, LED control device is included in the scope of compulsory certification; LED lamps and lanterns series partition rule changes; Enterprise quality assurance capability requirements change.
Mainland China voluntary certification
LED lamps and lanterns and light source products can adopt the way of applying various voluntary certification marks to indicate that the products meet the relevant quality, security, performance, such as electromagnetic compatibility certification requirements. Voluntary logo certification focus on safety, electromagnetic compatibility, performance, harmful material set limit to (RoHS) directly reflect the quality of the products and affect consumers' personal and property safety indicators, designed to protect consumer interests and promote to improve product quality, enhance the international competitiveness of domestic enterprises.
Voluntary certification marks, such as: CQC certification, energy conservation, etc.
It is important to note: LED bulbs now temporarily can't apply for any certification mark in mainland China.
South Korea's certification
According to the regulation of "electrical appliance safety administration law in South Korea, domestic or foreign manufacturers in the electronic products to be imported to Korea before must be South Korea's security certification.
South Korea certification is divided into electrical appliance safety certification and self-discipline.
South Korea's certification background mainly involves the following aspects:
Low electrical appliance safety administration law import self-discipline safety confirmation.
Based on the endangering degree from the product, from January 2009 began to import:
A. electrical appliance safety certification
B. self-discipline safety confirmation
Low self-discipline security certification since January 1, 2010 mandatory application.
KC use LED lighting products range:
South Korea certification needs to pay attention to what issues?
First of all, KC the applicant must be a manufacturing factory.
Second, the technology to focus attention on the following items:
(1) the product must conform to safety standards (K), South Korea, IEC standards at least meet the requirements of South Korea.
Similar to CISPR standards. (2) the EMI requirements.
(3) EMS requirements similar to IEC standard.
(4) home power voltage rating: ac 110 v, 220 v, 380 v.
(5) the rated frequency of the power: 60 hz
6 power plug should be consistent with KSC8305 (Korean industrial standard) or with the A1-15 IEC60083, A5-15, C2b, C4, C1b, C3b, C6 any standard.
All landowners manufacturers must be actual maker.
Bring about when a product is manufactured by several independent factories, each factory will get certification.
Bring about even the same model (model) to also want to apply for certification, respectively.
Bring the Korean agent from foreign producers can submit an application after the authorization of the legal agent certification.
Electrical appliance safety certification under the condition of factory inspection in accordance with long-term effective.
Self-discipline safety confirmation certificate is valid for five years.
PSE, called 'fit check' in Japan, Japan's electrical products mandatory market access system, is the electrical appliances safety "of a as long as the content, rules and regulations will be electrical products are divided into 'specific electrical appliances () and non specific electrical appliances ().
Due to replace incandescent light bulbs, fluorescent tubes, LED lamps and lanterns in Japan rapidly, a large number of listed on the market, consumers in many product safety accident happened in the course of using, therefore since 2012, July 1 (pp.47-53 24 years), the electrical appliances safety "additional" LED lights "and" the LED lamps and lanterns' as the control object, into the 'non specific electrical products range.
Detailed content can be reference to the electric 気 supplies security law enforcement ordinance (showa 37 decrees on 14 August three hundred and twenty-four).
PSE certification technical standards for:
Province makes the provisions of paragraphs 1 and 2 (showa 35 years (1962) Japanese trade and industry, on August 14, 85).
Province makes one don't table 8 - Japan's independent technical datum.
Province to coordinate two - Japanese standard J, such as J60598-2-1 + Japanese differences (IEC).
Because LED lights at present, there is no corresponding coordination standard in Japan, the PSE certification can only be used for the province to make eight don't table 1.
PSE LED lamps and lanterns and light source PSE testing requirements:
Will check items: safety + EMI.
Factory inspection: no requirement.
The validity of the certificate: test datum and products on the premise of not change, long-term effective.
Note: when applying for PSE certification of lamps and lanterns, use of independent type control device should be certified.
SAFETY sign (SAFETY Mark) certification is mandatory SAFETY certification, Singapore for emc part did not demand, certificate of SAFETY sign is by Singapore product standards issued by the bureau.
Products before entering Singapore, must by a tax in Singapore companies as application safety sign of the holder. Products to achieve safety sign, in the sales of Singapore.
Certificate of safety sign features below:
1, certificate holders for Singapore local companies, factory inspection and annual fee;
2, certificate of validity: three years;
3, product certification "series" application (each certificate can only cover a single model).
Note: the lamps and lanterns of Singapore currently listed in the control class only lamp series of floor lamp and desk lamp/products.
Certification in Taiwan
The ministry of economic affairs in Taiwan the BSMI (BSMI) according to the commodity inspection requirements, formulated the commodity authentication login, through 'commodity authentication login' products, can be labeled with BSMI.
According to Taiwan "commodity authentication login method" the provisions of article 2, the holder must be a legitimate businesses in Taiwan.
LED lamps and lanterns and LED light source for commodities subject to inspection, the ministry of economic affairs the bsmi shall make a public announcement on January 6, 2014, since July 1, 2014 LED bulbs merchandise to implement compulsory, subject to inspection test project contains safety, performance and electromagnetic interference, etc., make people to use safer, more energy efficient.
Certificate of safety sign in Taiwan features below:
Type test standard: CNS in Taiwan.
Authentication mode: in accordance with the provisions of the "goods to verify login method" the pattern of 2 + 3;
The validity of the certificate: 3 years.
In 1969, the Thai industrial standards institute (TISI) cabinet approved the establishment by the Thai government, its function as a national standard revised the relevant laws and regulations enacted legislation. Will protect consumers' rights and interests, environmental protection and natural resource protection, make industrial development competitive world market, and to ensure fair trade, the standardized measures to eliminate trade barriers.
TISI certification has two different types of authentication marks, namely voluntary certification marks and compulsory certification marks.
LED lighting products and LED lighting products is not in the scope of compulsory certification of Thailand, Thai domestic sales have CB can, need not apply for certification of Thailand.
On April 1, 2014, the Indian standards (BIS) enforce the ISI certification.
India's certificate of safety sign features below:
Authentication mode: type testing + factory inspection
The validity of the certificate: one year.